Bicycles leaning in a turn
Dynamics[edit source | editbeta]
Main article: Bicycle and motorcycle dynamics
A bicycle stays upright while moving forward by being steered so as to keep its center of mass over the wheels.[21] This steering is usually provided by the rider, but under certain conditions may be provided by the bicycle itself.[22]
The combined center of mass of a bicycle and its rider must lean into a turn to successfully navigate it. This lean is induced by a method known as countersteering, which can be performed by the rider turning the handlebars directly with the hands[23] or indirectly by leaning the bicycle.[24]
Short-wheelbase or tall bicycles, when braking, can generate enough stopping force at the front wheel to flip longitudinally.[25] The act of purposefully using this force to lift the rear wheel and balance on the front without tipping over is a trick known as a stoppie, endo, or front wheelie.
Performance[edit source | editbeta]
Main article: Bicycle performance
The bicycle is extraordinarily efficient in both biological and mechanical terms. The bicycle is the most efficient human-powered means of transportation in terms of energy a person must expend to travel a given distance.[26] From a mechanical viewpoint, up to 99% of the energy delivered by the rider into the pedals is transmitted to the wheels, although the use of gearing mechanisms may reduce this by 10–15%.[27][28] In terms of the ratio of cargo weight a bicycle can carry to total weight, it is also an efficient means of cargo transportation.
A recumbent bicycle
A human traveling on a bicycle at low to medium speeds of around 10–15 mph (16–24 km/h) uses only the energy required to walk. Air drag, which is proportional to the square of speed, requires dramatically higher power outputs as speeds increase. If the rider is sitting upright, the rider's body creates about 75% of the total drag of the bicycle/rider combination. Drag can be reduced by seating the rider in a more aerodynamically streamlined position. Drag can also be reduced by covering the bicycle with an aerodynamic fairing. The fastest unpaced speed on a flat surface is 82.819 mph (133.284 km/h)[29]
In addition, the carbon dioxide generated in the production and transportation of the food required by the bicyclist, per mile traveled, is less than 1/10 that generated by energy efficient cars
Dynamics[edit source | editbeta]
Main article: Bicycle and motorcycle dynamics
A bicycle stays upright while moving forward by being steered so as to keep its center of mass over the wheels.[21] This steering is usually provided by the rider, but under certain conditions may be provided by the bicycle itself.[22]
The combined center of mass of a bicycle and its rider must lean into a turn to successfully navigate it. This lean is induced by a method known as countersteering, which can be performed by the rider turning the handlebars directly with the hands[23] or indirectly by leaning the bicycle.[24]
Short-wheelbase or tall bicycles, when braking, can generate enough stopping force at the front wheel to flip longitudinally.[25] The act of purposefully using this force to lift the rear wheel and balance on the front without tipping over is a trick known as a stoppie, endo, or front wheelie.
Performance[edit source | editbeta]
Main article: Bicycle performance
The bicycle is extraordinarily efficient in both biological and mechanical terms. The bicycle is the most efficient human-powered means of transportation in terms of energy a person must expend to travel a given distance.[26] From a mechanical viewpoint, up to 99% of the energy delivered by the rider into the pedals is transmitted to the wheels, although the use of gearing mechanisms may reduce this by 10–15%.[27][28] In terms of the ratio of cargo weight a bicycle can carry to total weight, it is also an efficient means of cargo transportation.
A recumbent bicycle
A human traveling on a bicycle at low to medium speeds of around 10–15 mph (16–24 km/h) uses only the energy required to walk. Air drag, which is proportional to the square of speed, requires dramatically higher power outputs as speeds increase. If the rider is sitting upright, the rider's body creates about 75% of the total drag of the bicycle/rider combination. Drag can be reduced by seating the rider in a more aerodynamically streamlined position. Drag can also be reduced by covering the bicycle with an aerodynamic fairing. The fastest unpaced speed on a flat surface is 82.819 mph (133.284 km/h)[29]
In addition, the carbon dioxide generated in the production and transportation of the food required by the bicyclist, per mile traveled, is less than 1/10 that generated by energy efficient cars
